Toggle Bolt Anchor/Spring Toggle Bolt

Model NO.
M4-M100
Application
Machinery, Environmental, Building
Finish
Lain, Black, Zinc Plated(Zp), Yzp, H.D.G
Length
50-125mm
Trademark
OEM
Transport Package
Carton+Wood Pallet
Specification
M4-M24
Origin
China
HS Code
73186000
Our organization promises all customers with the first-class products and solutions and the most satisfying post-sale service. We warmly welcome our regular and new clients to join us for Toggle Bolt Anchor/Spring Toggle Bolt, The product will supply to all over the world, such as: Australia, UK, Marseille, Our company has always insisted on the business principle of "Quality, Honest, and Customer First" by which we have won the trust of clients both from at home and abroad. If you are interested in our products, please do not hesitate to contact us for further information.
Glori-Industry Hongkong Incorporation Limited Diamond / Audited Supplier
Toggle Bolt Anchor/Spring Toggle  Bolt (ZP , YZP, Galvanized, Plain, etc.)
Specs:
Anchor Size Wing Length(mm) Drill Hole Pull out Load Kgs  Qty/Box

 M3

 34  10mm  130  200
 M4  39

 12mm

 150  200
 M5  50

 14.5mm

 200  200
 M6  53  16.5mm  500  200
 M8  66  20mm  500  100
 M10  74  23mm  550  50
 1/8″  34  3/8″  130  200
 3/16″  50  1/2″  200  200
 1/4″  53  5/8″  500  200
 5/16″  66  3/4″  500  100
 3/8″  74  7/8″  550  50

How to use:

  1. Drill the correct size hole to enable the wings of the toggle to pass through the material being fastened to. A sharp drill bit with minimum pressure will prevent damage at the break through point.
  2. Pass the screw through the fixture being fastened and re-assemble allowing the end of the screw to slightly pass through the yoke.
  3. Close the wings back along the length of the screw and check that there is sufficient length of screw to enable the wings to clear the thickness of material  being fastened into.
  4. Install the fixture against the wall guiding the toggle through the hole and pressing home until it falls down into position or springs open into position. Check that the wings have opened/ fallen into place by pulling back on the fixture.
  5. Tighten the screw, at the same time, pulling back on the fixture to keep the toggle in contact with the reverse side of the work surface. Do not over tighten to avoid stripping of the threads in the yoke.