Pneumatic gas CO2 recovery and filling load booster pump Pressure control equipment, Gas high pressure test bench.
TEREK Gas Booster control cabinet is a complete gas booster units , It provided maximum operating pressures up to 80MPa. Its pressurizing medium is pure gas fluid.
High pressure output pressure is produced by pneumatic gas booster pump. Therefore, No electrical connection is required.
To operate this system, The drive gas from the air compressor is required to start the TEREK booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted
The expected working pressure can be achieved by adjusting the pressure of the drive inlet.. When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value.
Constant gas outlet pressure can be obtained by GU-GTC series gas pressurization unit control cabinet
GU-GTC series gas booster unit control cabinet mainly includes one sets of GTCseries air-driven gas booster, pressure gauges, air filter, gas inlet filter, control valves, air regulating valve, pipelines, cabinet, high pressure regulator, high pressure relief valve, pressure release valve etc.
Model A: Simple frame type of stainless steel material
Model B: Closed cabinet type of carbon steel material
Model C: Closed cabinet type of stainless steel material
|Type||Pressure ratio||Min gas inlet pressure PA||Max gas inlet pressure PA||Max permitted outlet pressure PB||Formula to calculate gas outlet pressure PB||Max flow LN/min (PL=6bar)|
1.Specially suitable to the high pressure tests and ultra-high pressure tests in the field or in the workshop
2. The pump will stop working automatically when the output pressure reaches the preset value,
3. Maintain long working hours with no energy expenditure
4.No dissipated heat during the pressure holding phase
5.No risk for explosion and spark in oil and gas field
6. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.
7. The working pressure can be adjusted by adjusting the pressure of the driven air.
1.Pressure test with gas
2.Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
3.Charging of gas cylinder and accumulator with nitrogen
4.Supply for isolating gas systems
5. High pressure gas injection system for various industries
6.Transfer of oxygen cylinders
7.Charging of breathing air bottles
9.Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, gas bottles and air craft components
Packaging & Shipping
Shandong TEREK Manufacture & Trading Co.,LTD was established in 2000.
TEREK Company focus on provide various kinds of pneumatic and hydraulic booster pumps, Safety valve test bench, booster systems and pressure solutions to the customers all over the world ,
With more than 18 years experiences in fluid pressure exchange and controlling field.Good quality products and perfect after-sale service have won us a good reputation and a lot of customers both at home and abroad.
How to Select Air Driven Gas Boosters/Systems?
In order to choose the accurate and appropriate booster pump or systems for you,
Please kindly reply us the following questions:
1.What is the pressure of the current gas? ( )bar
2. What kind of gas needs to be pressurized ? oxygen gas, nitrogen , hydrogen, carbon dioxide , methane , ethane , propane , butanaze or other gases?
3.What is the output pressure of the gas you want?( )bar
4.What is the driven air pressure ( Your air compressor) you can provide ?( )bar,
Because our booster pump is completely air driven and no need any electricity
5.How much of the outlet gas flow rate do you need?( )L/min
6. What is its purpose or application field you used it? Thanks