Hicotek 4 Port Desktop Poe Switch with 1 RJ45 and 1 SFP Fiber Uplink Ports Full Gigabit Built-in 65W Power

Model NO.
HC-804GP-1G1SFP
Applications
Poe IP Camera, Poe WiFi Ap, and Poe IP Phone
Power Supply
Power Cord
Trademark
HICOTEK/OEM/ODM
Transport Package
Gift Box
Specification
202X140X45MM
Origin
China
HS Code
8517623290
The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for Hicotek 4 Port Desktop Poe Switch with 1 RJ45 and 1 SFP Fiber Uplink Ports Full Gigabit Built-in 65W Power, The product will supply to all over the world, such as: Kuwait, United Arab emirates, UK, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we provide our clients with high quality products and excellent service. Please feel free to contact us for further information.
HICO TECH CO., LIMITED Diamond / Audited Supplier
To fulfill the demand of High Power POE for network applications with Gigabit transmission,HC-804GP-1G1SFP POE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the HC-804GP-1G1SFP features IEEE 802.3af and IEEE 802.3at Power over Ethernet (POE) that combine up to 65-watt POE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling POE power, more than the current conventional 802.3af POE.
All RJ45 copper interfaces of the HC-804GP-1G1SFP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 1extra 1.25Gbps SC interface can be used for uplink.

Typical applications please refer to following picture

 

Features

  1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
  2. 4-Port 10/100/1000Mbps supports 52V DC power to POE Powered Device
  3. 1 RJ45 10/100/1000Mbps for uplink
  4. 1 1.25Gbps SFP interface for uplink
  5. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span PSE
  6. Up to 4 IEEE 802.3af devices powered
  7. Supports POE Power up to 15.4 watts for each POE port
  8. Up to 4 IEEE 802.3at devices powered
  9. Supports POE Power up to 30 watts for each POE port
  10. 65-watt POE budget
  11. Auto detects powered device (PD)
  12. Circuit protection prevents power interference between ports
  13. Remote power feeding up to 100m
  14. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  15. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  16. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  17. Integrates address look-up engine, supporting 8K absolute MAC addresses
  18. 2M packet buffer
  19. 10K Jumbo frame supports at 1000Mbps duplex mode
  20. IEEE 802.1Q VLAN packet transparency support
  21. Automatic address learning and address aging
  22. Made of metal, desktop size and wall-mount design

Front panel

Item Description
Model HC-804GP-1G1SFP
Power Supply Power Supply Mode Power adapter
Voltage Range AC 100~240V
Power Consumption The device <5W,                                                        POE power supply <65W
Network Port Parameter Network Ports  1~4 Ports: 10/100/1000Mbps Ethernet port, adaptive control
Uplink 1 RJ45: 10/100/1000Mbps
Uplink 1 SFP:1.25Gbps
Transmission Distance 1~4 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
1 SFP: According to different optical module
Transmission Media 1~5 Ethernet Port:Cat5e/6 standard UTP cable,
Fiber: LC interface optical fiber
POE Agreement IEEE802.3 af/at standards
POE Power Supply Mode End-span method
POE Power Supply Wattage Each port≤30W,Whole device<65W
Network Switch Specification Network Standard IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
Swap Mode Store-and- forward
Switch Capacity 12Gbps
MAC Address List 8K
Status Indicators Power Indicator Light One power light (green)
Optical Fiber Port Indicator One fiber link indication light ( green), Green light keeps on when the fiber port is well connected
POE Indicator 1~4 POE indicator light(yellow)
POE Network Port LED 1~5 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
Protection Level Surge Immunity Level 3, executive standard:IEC61000-4-5
Electrostatic Protection 1a touch electric discharge: level 3                        1a Air discharge: level 3                                Executive standard:IEC61000-4-2
Operating Environment Working Temperature -10ºC~55ºC
Storage Temperature -40ºC-85ºC
Humidity(non-congeal) 0~95%
Mechanical Attributes Dimensions (L*W*H) 202X140X45MM
Color Black
Weight 1kg
Reliability Mean time between failures (MTBF) >50000h