Article 850 ºC high temperature sintering furnace
Modle :YTH – 25
1. Machine size W1400mm*H1414mm*L6650mm(approx.)
Registration area W1295mm*H910mm*L610mm(approx.)
Heating zone 330mm*10 zone =L5430mm(approx.)
Cooling zone L1175mm(approx.)
Exit area W1295mm*H910mm*L610mm (approx.)
Temperature around the degree of high temperature: 900 ºC MAX use scope: 800 ~ 900 ºC (high) temperature uniformity: 90% of the transmission network bandwidth, empty furnace high temperature constant temperature zone in state holding temperature value of lower, middle and right temperature uniformity is plus or minus 1.5 ºC.
2. Electricity AC380V 3 hoop speed hz 116KW
3. Upper and lower heating system ceramic heating plate
Upper heating plates -10 sets
Lower heating plate -10 sets
4. Conveying system conveying network belt material :N80 with brush cleaning device, conveying mesh specification: W625mm *L14700mm
5. Transmission speed: 100~250mm/min(standard speed :230mm/min)
Transmission motor :AC 3P motor
Frequency converter drive control motor speed, speed setting via RS485 module conversion DC0 ~ 10 v provide Inverter control (makes) control
6. The copper plate-type is attached to and below the cooling chamber, and you can use the copper plate-adsorbed cooling energy to achieve an efficient cooling system.
7. Numerical orimeter is used for flow control
Firing air pressure :40~300L/min*1
Cooling of inlet: 15~100L/min*1
8. Control system control mode: dual mode (one is temperature control meter controller and one is industrial control computer display).
10 zone heating zone temperature control, each zone is divided into left, middle and right temperature control meters with 30 zones.
Temperature control mode I D(comparison/integral/differential)
Control interface: WINDOWS7
Electrothermal control :SCR
Electric couple :K Type
The rate of increase is limited to 3~5ºC/min during heating
Maximum heating power rate: limiting heating output power rate
Symptoms article states the status graph: in a simple bar chart shows furnace temperature of symptoms, abnormal red, green said.
Setting screen: setting temperature, speed, alarm value, modified value (passcode required)
PID adjustment screen: the display and setting of PID setting value and the heating parameter of PID operation in each temperature region shall be passable code furnace temperature uniformity testing: using high temperature line into the furnace actually, temperature and time and temperature range of all cut graph, to analyze all the zones of warm.
8. control system
Control mode: double set type (one set for temperature control meter controller, one for computer display).
10 district heating area temperature control, each district is divided into left, middle, right temperature watch alone control area 30 temperature control table.
Temperature control mode: P I D (ratio / integral / differential)
Control interface: WINDOWS
Electrothermal control: SCR
Electric thermocouple: K Type
Heating limit: when heating is heating, it limits the temperature rise per minute, 3~5 C /min
Maximum heating value: limit heating output power
Bar chart: a simple bar chart shows the state of temperature and temperature. Red indicates normal, and color indicates normal.
SET settings: set the temperature, speed, alarm and correction values.
PID adjust the picture: the PID settings in each temperature zone and the operation of PID heating and display must be coded.
Temperature uniformity test: the high temperature temperature measurement line is actually entered into the dam, and the chart is made with temperature and time and temperature zone to analyze the temperature uniformity of each temperature zone.
1. warm up and down warnings
2. air pressure upper and lower alarm
3. transmission speed upper and lower alarm
∗ Reasonable design
∗ Low consumption, energy saving
∗ Easy to maintain
∗ Easy to operate
Shipping and packing
(1) By sea (2) By air (3) By expressage.(DHL,FEDEX,UPS,TNT etc.)
Custom packaging:We also packing according to customers requirement.We can make the prouducts according to your requirement , no matter what country you are from.
Dongguan City Jinyao Exactitude Equipment co., LTD are able offer a complete range of Laboratory ovens, Drying Ovens and Curing ovens including Temperature Chambers that offer a good range of solutions for the testing, storage and drying or curing materials and components, electronic components and assemblies, the storage of laboratory test samples and the testing of material samples.
Our laboratory, drying, curing ovens and Temperature chambers are supplied with a microprocessor controlled PID control system, with several levels of programmable functions dependent upon model chosen which can be used either as single set point controller for long term stability tests or as Fully programmable controller for cyclic type testing.
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise.
2. Middle service
–Give you best offer
–Provide discount for many sets order
–Do customers request:
–Choose payment term you convenient
–Promptly production and delivery,inform you in time.
–Can provide invoice value as you like to decrease your tax.
3. After sale service
–1 year warranty service and all life maintenance.
–Technical Engineer are available for oversea training.
–Free change for some parts
–Remote control technical consult
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
OUR COMPANY INFORMATION
Dongguan city Jinyao precision Equipment co., LTD is one of Enterprise combining develop, produce and sale. Established in 1980, already have 30 years experience to produce: precision Hot-air drying oven; IR/UV deliver drying equipment; environmental test equipment; printing machine; automation industrial equipment etc.
Our company always keep the aims that provide high quality product; quick service attitude and the great design. We keep the company spirit that has advance technology and high quality team. Our product receive a lot of client trust, and stand firmly front of others.
Dong Guan YUTSAI precision device enterprise LTD. is registered capital achieve ten million RMB. It has 4800 square meters factory. More than three million RMB fixed assets. Value of output achieve 24million RMB each year.
We has the steady domestic clients such as: FOXCONN, HuohYow, FU BROTHRT industrial company, HUAXIN technology company, PUYAO group etc. Its all about more than 500 company include Domestic ,foreign and military enterprises. We also has the long-term relationship with Thailand, India and England.
The company toward higher, farther, more perfect operating system. the Taiwan Head Company as the axis, and we make efforts in mainland market development.
1. Can you customize the product?
Yes, we can customize any products according to customers requirements.
2. Which payment terms are you doing?
PayPal, West Union, T/T, (100% payment in advance.)
3. Which shipment is available?
By sea, by air ,by express or as your requirement.
4. Which country you have been exported?
We have been exported to many countries, all most all around the world, like Malaysia, Vietnam,
Thailand, United States, France, Spain, Mexico, Dubai, Japan, Korea, Germany, Portland Etc.
If you want to know more detailed information about our products , please feel to contact us at any time !
WELCOME TO CONTACT US !