Disc Tube RO Membrane Module (90bar)

Model NO.
DTRO5-8042
Cross Replacement
Rochem, Rotreat, Pall
Vessel Material
FRP
Trademark
RisingSun
Transport Package
Wooden Box
Origin
China
HS Code
84212990
While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Disc Tube RO Membrane Module (90bar), The product will supply to all over the world, such as: New York, Czech republic, Ecuador, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and perfect service . We also warmly welcome customers to visit our company and purchase our products.
RisingSun Membrane Technology (Beijing) Co., Ltd. Diamond / Audited Supplier
RisingSun Membranes Disc. Tube membrane module includes RO and NF by using different kinds of membrane sheet. The membrane module structure is completed distinct from the traditional spiral wound membrane. With open flow channels, feed flows through the entrance into the pressure vessel and reach the disc in a short distance. Then the feed flows 180 degrees from one side of the membrane reverse flow into the other side of the membrane, into the next disc again and finally runoff from outlet.

This special design makes feed collide with the disc bulge through the membrane surface forming turbulence which increases flow rate and self-cleaning function and long service life of the membrane.

Features:

  • High strength design, up to 160bar operation pressure
  • Simple pre-filtration
  • Open channel configuration enables low flow resistance and low concentration polarization, Minimize membrane scaling and fouling
  • Easy to maintain
  • High rejection and high recovery rates with low energy costs (up to 99.6%)
  • Long membrane life
  • Lower membrane replacement costs
  • High quality product water

Application fields:

  • Treatment & re-use of landfill leachate 
  • High concentration of industrial waste water
  • Effluent & waste water treatment from API, formulation plant & combined effluent from pharmaceuticals industry
  • Effluent treatment from textile industry and dyeing unit
  • Picking & oily waste treatment in steel industry
  • Metal recovery waste recycling
  • Traditional spiral RO / NF concentrate treatment 
  • High COD/BOD waste water treatment (max. COD 20,000ppm)

A typical process diagram:

90bar High pressure membrane module specification:
 

Items High pressure (90bar)
   Model SP-DTRO5-8042
   Membrane sheet  Composite Polyamide (RO5)
   Membrane cushion qty. (pc) 209
   Stable rejection** 99.5%
   Min.  Rejection (%) 99.0%
   Membrane effective area (m2) >9.4
   Feed flux** (l/h) 500-1200
   Permeate flux range (l/h) 400
   Hydraulic disc material ABS
   Vessel material FRP
   Operation pressure (bar) 90
   Max. TMP (bar) 9
   Max. operation temperature (ºC) 40
   Chlorine tolerance (ppm) <0.1
   Recommended operation pH 3-11
   Chemical cleaning  pH@40ºC 2-12

** RO5 test condition: 32,000mg/l NaCl solution at 55bar applied pressure, 25ºC; Permeate flux and stable rejection may vary based on inlet water condition. There may have about ±20% change for individual module permeate flux.


 

Operation Pressure (bar) 90 bar
     Total module length A (mm) 1400
       Vessel length B (mm) 1150
      Module diameter C (mm) 220
      Vessel to top of frame D (mm) 98
      Inlet to flange center distance E (mm) 76
      Outlet to flange center distance F (mm) 56
      Inlet & outlet connections diameter (mm) 12
      Permeate connection (mm) 1 x  G3/8″-90° elbow for 9mm  hose

DTRO / DTNF membrane module structure

 

Item Name Item Name Item Name Item Name
1 Tie rod 7 End flange 13 O-ring 14-2 19 Reinforced top flange
2 Thick nut 8 Screwing tie rod 14 O-ring 52-4 20 Membrane vessel
3 Top flange 9 Tie rod gasket 15 O-ring 48-2 21 Reinforced rod
4 Distance fitting 10 Thin nut 16 Membrane cushion 22 Reinforced end flange
5 Hydraulic disc 11 Inlet/Outlet connection 17 O-ring 39-3 23 Reinforced nut
6 Lip seal 12 Permeate connector 18 Screwing tie rod    

Why us?

1. Cost is competitive and fast lead time.
2. Cross reference: Rochem DT module and PF module
3. Cross reference: Rotreat RCDT module