|Materials||Aluminum & PC Cover||Aluminum & PC Cover||Aluminum & PC Cover||Aluminum & PC Cover|
|Wrranty||5 years||5 years||5 years||5 years|
1. Can be linkable to be a continuous line.
2. Can be L-shaped link, T-shaped link, cross-type link.
3. As high as 100lm/w.
4. No dark areas of splicing.
5. Flicker free.
6. Optional dimming:0-10V, PWM, resistors.
7. Length of 0.6 meters,1.2 meters,1.8 meters,2.4 meters to choose from.
8. 5 years warranty.
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are in good condition once the packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard staff.
4. Make sure that the cable of fixture is long enough to connect.Do not knot or pull the cable strongly.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well.Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid,free from electric leakage and eletricity shock.
Wide beam angle with good lighting distribution is quite suitable for warehouse lighting,outdoor lighting,parking lot lighting,work shop,all industrial lighting
Matters needing attention
1.Before installing the lighting fixtures, please read this instruction manual carefully.
2.The lighting fixtures should be installed, connected and tested by a certified installer based on the local regulations.
3.Lamps should always be installed or replaced with care.
4.Please check the local voltage in accordance with the product requirements before using the product.
5.Relamping only can be done when the power is off and the lamp is completely cooled down.
6.When a lamp is to be cleaned, make the power off and let it cool down completely.Clean the fixture with a soft cloth and a standard PH neutral detergent. Stainless steel finishing should be maintained regularly.
7.Misuse of, or changes to the fixture shall nullify the guarantee.
8.Dont cover the fixtures with flammable materials.
9.Exclusively replaced by the manufacturer or his service agent or the similar qualified person in order to avoid a hazard.
|Can not light up||Wrong or loose wiring connection||Double check wiring methods, and connect in the right way. Do cut off electricity before wiring|
|Using wrong LED driver||Replace it with adaptive LED driver|
|LEDs damaged or LED driver damaged||Repair or replace it with new light source or LED driver|
|Blinking light||Fixtures do not match LED driver, or LED driver fails||Repair or replace it with new driver.|
(1) No glare, mercury, ultraviolet, infrared or other hazardous substances
(2) Operating Temperature: -20ºC to +40ºC
(3) Operating Humidity: 10% to 80%
(4) Storage Temperature: -40 to +85 ºC
(5) Storage Humidity: 10% to 80%
Q1.Can I have a sample order for LED light?
A:Yes.We welcome sample order to test and check quanlity.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 3-5days,mass production time needs 1-2 weeks for order quantity more than.
Q3.Do you have any MOQ limit for LED light order?
A:Low MOQ 1pc for sample checking is avaiable.
Q4.How do you ship the goods and how long does it take to arrive?
A:We usually ship by DHL,FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5:Is it ok to print my LOGO on LED light product?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our samle.
Q6.Do you offer guarantee for the products?
A:Yes.We offer 2-5 years warranty to our producs.
Based in Shenzhen,Lumin Lighting is a fast-growing semiconductor lighting manufacturer and suppliers in
China.Lumin Lighting was founded on November 17,2008.Since its founding,Lumin Lighting is committed
to developing,manufacturing and popularizing LED lighting products,responding to the government policy of
energy-saving,emission reduction,and maintainable development.
Lumin Lighting product lines mainly include LED Panel,LED downlight,LED bulbs,and outdoor lights.Meantime,
Lumin Lighting also provides customized lighting solutions to customers.
Lumin Lighting takes product quality as our lifeline.We focus on quality during thewhole production process
by seriously carrying out ISO 9001 Quality System and ISO Environment Management System.
(1) Your inquiry will be replied within 12 hours.
(2) Fast sample deliverly:3 days around.
(3) Best-trained and experienced sales staffs follow up with your inquiries and orders.
(4) OEM/ODM services:all can be customized.
(5) Distributor,agent,investor and more are welcome.
(6) It can be 5-year limited warranty:spare parts can be offered along with orders.