1tph Rosin Expansion Furnace,Vitrified beads expansion stove,furnace for Insulation mortar raw material Expansion Furnace Working principle
The production process of expanded perlite includes two key processes of preheating and expansion.
(1) Preheating: According to the difference of origin and grain size, after the pearlite ore is preheated for 2-8 minutes at a temperature of 650-800 °C, the water content will reach the expansion requirement.
(2) Expansion: The pre-heated ore is evenly sprinkled onto the flame at a temperature of 1100-1200 °C through the feeding device. The ore will be heated rapidly and rapidly expand to 10-30 times the original volume. The expanded perlite The particles are white or light gray and contain a honeycomb structure inside.
(3) The expanded perlite enters the collection bin with the high-temperature gas separated by the cyclone separator, and the high-temperature gas containing a small amount of fine dust is discharged to the atmosphere by the bag dust removal device.
rosin Expansion FurnaceMain components and functions of the equipment
1. Preheating furnace: remove the moisture in the ore and heat the ore to more than 200 degrees.
2. Bucket elevator: Lift the heated ore directly to the top of the main furnace.
3. Coal-pulverized dusting machine: The raw coal is turned into 80-120 mesh powder by the crushing process and sent to the furnace to achieve complete combustion.
4. Expansion furnace: The expansion operation is carried out on the perlite ore after the heat.
5, water cooling system: for high temperature finished products to cool down.
6. Worm separator: The separated expanded perlite products are sent to the silo by air.
7. Dust collector: The dusty exhaust gas is purified and discharged to the standard.
rosin Expansion FurnaceFeatures and Advantage
1. Advanced design and reasonable structure. This equipment fully draws on the advanced design concept of Europe, based on the actual production experience of our country, after repeated trials, bold innovation, and finally developed by our companys technical staff, a new generation of perlite puffing equipment. Preheating-drying-expansion-finished product collection, the production process is reasonable and scientific, simple and practical, easy to manage.
2. The heating method is reasonable. The main furnace uses pulverized coal combustion to provide expansion heat energy. The combustion is fully and thoroughly, the coal consumption is reduced to the minimum, and it is convenient to reduce the comprehensive cost of the product. At the same time, it also overcomes the disadvantages of high energy access cost such as natural gas and gas, poor supply stability and difficulty in preservation.
3. High output. The expansion of the vertical raft is 25-35m3 per hour, and the daily output of expanded perlite is 300 cubic meters, which fully meets the sales needs. Compared with the old-fashioned expansion equipment, the output is increased by nearly 20%.
4. Low carbon and environmental protection. By installing the air-exhaust and dust-removing equipment, the dust discharge of the equipment is greatly reduced, and the smoke is discharged after being filtered, and is safely discharged, and is harmless to the environment.
5. The equipment has high stability and easy maintenance. The design of the device is reasonable, the wear and tear are less, and the maintenance is easy. After the equipment is put into production, the operation is stable and reliable, the failure rate is low, and the maintenance difficulty is small.
rosin Expansion FurnaceProduct Parameters
Open cell type with coal gasifier heating
|Fuel gas power||600-1000KW|
|Coal gas consumption||2000NM3/h|
|Heating type||direct heating|
rosin Expansion Furnace Our Services
1. Enquiries quickly reply within 24 hours.
2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours. We can arrange professional engineers arrived at equipment location within 48 working hours for problem solved.
3. The dust collector design according to the specific condition of dust removal technology. The wind network project design for all system. To be the optimal structure design.
4. The lowest equipment price whole network in alibaba Welcome to rate of the price. If our price is higher, we will return twice of our quoted price difference to you. Please prompt before sign the contract with us. Due to our good faith principle.
5. The bag filter equipment over 20 years working life.
6. Associated with equipment spare parts, ensure the replacement parts within 20 years.